Adhesives for manufacturing and installation of parquetry 

Parquet floors stand for warmth and comfort. To preserve their beauty and elegance over a long time, high-quality adhesives are used in manufacturing and during installation. If underfloor heating is in place, using the right adhesive in the parquetry plays a key role for good long-term results.

We can help you find the right adhesive for your parquetry and also provide a number of excellent services.

Production

Production two-layer parquet boards

The production of two-layer parquet is usually carried out in automated production processes. The base layer of the parquet element fulfills purely structural purposes and can consist of solid strips or wood-based panels. The visible layer glued on top is then made of particularly high-quality wood. In addition to other types of adhesives, PUR hotmelt adhesives, which are applied to the top and bottom layers in bead form, are used in particular for excellent and long-lasting bonding results. Due to the bead shape, PUR hotmelts are able to compensate for tolerances.

For the production of 2-layer parquet, we offer our reactive PUR hotmelts in the 705 and 702 product series. They offer the following benefits:

  • inline processing and gluing possible; i.e. the pressing times are only a few seconds long

  • very high temperature and moisture resistance due to the chemical crosslinking process

  • flexible glue joint even after crosslinking (no creaking under load strains, etc.)

  • high aging resistance

To the product table & consultation options.

Production of three-layer parquet boards

In three-layer parquet board manufacturing, three material layers are glued together to form a composite. However, since essentially flat materials are bonded together, adhesives should preferably be applied as a closed film. PVAc dispersions or EPI systems are frequently used. However, modern system concepts rely on PUR hotmelts, which can significantly reduce throughput times.

To the product table & consultation options.

Adhesives for installing parquet

Floating installation

In floating installation, the parquet floor is not glued to the subfloor, but laid loosely on the subfloor. The necessary stability is provided by the tongue and groove joints in the parquet elements, which in turn may be glued together.

For a long-lasting and visually sophisticated installation of floating tongue and groove parquet, we offer a special adhesive. KLEIBERIT 351.0 fulfills the stress group D3 according to DIN EN 204, is colorless and results in a hard-elastic glue line. The product has been popular with craftsmen and installers for decades.

To the product.

 

 

 

Full-surface bonding of parquet flooring

When laying parquet flooring over the entire surface, it is important to work cleanly and use the right adhesive. Several factors determine the choice of the right parquet adhesive. In general, a distinction is made between absorbent and non-absorbent subfloors. A true all-rounder is a parquet adhesives based on STP - KLEIBERIT 583.5. This adheres to almost all materials without pre-treatment and provide excellent results. It is easy to process and has impact sound absorbing properties. Furthermore, it is considered very low-emission according to GEV Emicode and has the EC 1 Plus seal of approval as well as the emission class A+ according to French VOC regulations.

 

 

 


Full-surface bonding on mineral surfaces

Screed is considered an absorbent subfloor. For top results, the synthetic resin dispersion KLEIBERIT 350.0 should be used. KLEIBERIT 350.0 can be used pure for bonding small and mosaic parquet. In some cases, sealing the screed provides even better results. For this purpose, the 1C PUR coating product KLEIBERIT 555.3 should be used. It is even easier with our STP adhesive KLEIBERIT 583.5. Pre-coating is usually not necessary with these products.

Stone and ceramics are either absorbent or non-absorbent, depending on their nature. With the right parquet adhesives, you can bond both types without any problems. Our parquet adhesive based on STP - KLEIBERIT 583.5 - ensures the best results here – let our experts advise you, and take a look at our product table.

 

 


Full-surface bonding on wood

In some cases, the parquet is also bonded to wood-based panels, such as OSB or chipboard, over the entire surface. For this purpose, we offer PUR systems as well as low-emission STP systems. The choice of adhesive depends on the individual circumstances, requirements and personal preferences. Contact us for advice and find the right product for your needs.

Have a look at our product table.

 

Products

Adhesives for parquet production

KLEIBERIT 303.0.00 White glue
  • dispersion with medium open time (6-10 minutes)
  • for waterproof glue joints
Base
PVAc
Certificates
  • DIN EN 204 D3 and with hardener DIN EN 204 D4
  • DIN EN 14257 (Watt 91)
  • IMO FTP Code Part 5 & Part 2
Applications
  • for the production of multilayer parquet
KLEIBERIT 304.4.00 + 808.0.00 EPI systems
  • suitable for cold, hot and HF bonding
Base
EPI
Certificates
  • with KLEIBERIT 808.0.00 hardener DIN EN 204 D4
Applications
  • production of multilayer parquet
  • highest moisture resistance with hardener 808.0.00
KLEIBERIT 304.5.00 + 808.0.00 EPI systems
  • suitable for cold, warm and HF bonding
  • very long pot life of approx. 120 min
Base
EPI
Certificates
  • with KLEIBERIT 808.0.00 hardener DIN EN 204 D4
Applications
  • production of multilayer parquet
  • highest moisture resistance with hardener 808.0.00
KLEIBERIT 351.0.00 Parquet glue
  • colorless glue line
  • can be used as 1C directly from the bottle
Base
artificial resin dispersion
Certificates
  • DIN EN 204 D3
Applications
  • tongue and groove bonding of parquet elements for floating installation
KLEIBERIT 702.8.09 Reactive hotmelt
  • enables shortest pressing times in a continuous process
Base
PUR
Certificates
Applications
  • production of 2-layer parquet in a continuous process
KLEIBERIT 705.7.00 Reactive hotmelt
  • enables shortest pressing times in a continuous process
Base
PUR
Certificates
Applications
  • production of 2-layer parquet in a continuous process

Adhesives for installing parquet

KLEIBERIT 350.0.00 Parquet glue
  • paste-like consistency
  • very good brushability
Base
artificial resin dispersion
Certificates
Applications
  • for the installing of small and mosaic parquet, diluted also suitable as a primer with a high yield
KLEIBERIT 555.3.00 1C PUR Coating
  • easy to apply water barrier against rising dampness
Base
PUR
Certificates
Applications
  • sealing and strengthening of concrete, cement screed, etc.
KLEIBERIT 583.5.00 Parquet glue
  • very low emission
  • simple application
Base
STP
Certificates
  • EC1 plus according GEV Emicode classification
  • emission class A+ according to French VOC regulations
Applications
  • for installing parquet on absorbent and non-absorbent substrates
KLEIBERIT 583.6.00 Parquet glue
  • all-round adhesive for parquet installation, simple application
  • simple application
Base
STP
Certificates
Applications
  • for installing parquet on absorbent and non-absorbent substrates

Service

Personal Contact

fotolegende

©thodonal - stock.adobe.com


Connect with a contact person for your individual request!

Contact Form

fotolegende

©Jakub Krechowicz - stock.adobe.com


Use our contact form! Your personal contact will get back to you shortly.

KLEIBERIT Locations

fotolegende

©ipopba - stock.adobe.com


Contact one of our global offices!

Distributors

fotolegende

zaha.treecha17@gmail.com


KLEIBERIT has a global presence with a worldwide distributor network. Contact a distributor near you!